7075 aluminum is known as ultra high strength aluminum, 6061T6 aluminum professional manufacturers, the yield strength of the alloy close to the tensile strength 6061T6 aluminum factory specializing in the production, the yield is high, very high strength, but ductility and high temperature strength than the end, should be done at room temperature, load-bearing structural parts, ease of processing 120 ℃ the following alloy used, Jinan 6061T6 aluminum, has good corrosion resistance and high toughness. The alloy is widely used in aviation and aerospace, and this area has become one of the most important structural materials. Physical properties and mechanical properties of tensile strength: 524Mpa0.2% yield strength 455Mpa Elongation: 11% of the elastic modulus: E / Gpa: 71 7075 Edit this paragraph Features 1. High-strength aluminum heat treatable alloys. 2. Good mechanical properties. 3. To good use. The ease of processing, good wear resistance. 5. corrosion resistance, good oxidation resistance. High-frequency power supply requirements for the technical difficulty of aluminum welding process, ① use higher frequencies, so that the weld heat affected zone and the inner wall of the narrow current decreases. ② weld power density requirements, 6061T6 aluminum, welding speed, the faster, the better weld quality. ③ tube anode DC voltage requirements of stable and smooth, its ripple factor requirement of around 1%.