Aluminum mirror: that deal with Shandong Which molds for aluminum rolling through a variety of methods, grinding, etc., so that the mirror surface of the sheet showing the effect of aluminum. Embossed aluminum embossed aluminum plate and can be called: belong on the basis of aluminum, through a rolling process in a variety of patterns formed on the surface of aluminum products, molds for aluminum is widely used, mainly used in packaging molds for aluminum factory which Shandong good home, building molds for aluminum specifications, walls and so on. Chemical composition of Al Al: margin; Si Si: 0.25; copper Cu: 0.10; Mg Mg: 2.2 ~ 2.8; Zinc Zn: 0.10; Mn Mn: 0.10; chromium Cr: 0.15 ~ 0.35; iron Fe: 0.4 0. Tensile strength (σb): 170 ~ 305MPa Conditions yield strength σ0.2 (MPa) ≥65 modulus of elasticity (E): 69.3 ~ 70.7Gpa annealing temperature: 345 ℃. Aluminum specific cleaning steps are as follows: 1, first rinse with plenty of water surface of the plate; 2, using the wipe board surface soaked by water diluted detergent with a soft cloth lightly; 3, and then a lot of water rinse board the dirt away; 4, check the board for no clean place to wash with detergent focus; 5, rinse the board until all the detergent to wash away. Note: Do not wash the hot plate surface (when the temperature exceeds 40 ° C) because of excessive evaporation of water on the plate surface paint harmful! Molds for aluminum specifications, molds for aluminum, aluminum rolls provided by the Aluminum Co., Ltd. Jinan rolls. Jinan Heshun Aluminum Co. (www.jnhsly.com) strong, credible, in Jinan, Shandong aluminum products industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead rolls in aluminum and you hand into the brilliant, for a better future!