Aluminum specific cleaning steps are as follows: 1, first rinse with plenty of water surface of the plate; 2, using the wipe board surface soaked by water diluted detergent with a soft cloth lightly; 3, and then a lot of water rinse board the dirt away; 4, check the board for no clean place to wash with detergent focus; 5, rinse the board until all the detergent to wash away. Note: Do not wash the hot plate surface (when the temperature exceeds 40 ° C) because of excessive evaporation of water on the plate surface paint harmful! In order to improve the productivity of aluminum molds for aluminum, to ensure a reasonable finish rolling temperature Jinan molds for aluminum manufacturer in the device allows the use of high-speed rolling so far. In the actual production process of aluminum should be determined depending on the different stages of rolling The rolling speed. 1. Begin rolling stage, ingot thick and short, absolute reduction larger bite into difficulties, in order to ease the bite, usually a lower rolling speed. 2. The intermediate rolling stage, In order to control the finish rolling temperature and increase productivity Jinan molds for aluminum dealers Which is good, as long as conditions allow, Shandong molds for aluminum manufacturers Which is good, as far as possible the use of high-speed rolling. 3. Finally rolling stage becomes due strip too thin and long, rolling temperature drop big loss, a longer strip and roll contact time, in order to obtain an excellent surface quality and good aluminum plate, should be based on the actual situation, the appropriate choice of rolling speed. This helps reduce the impact of the mill, to protect the safety equipment. Jinan molds for aluminum molds for aluminum manufacturers _ _ cis-cis Alcoa Aluminum Co., Ltd. is provided by Jinan. Jinan Heshun Aluminum Co. (www.jnhsly.com) strong, credible, in Jinan, Shandong aluminum products industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead rolls in aluminum and you hand into the brilliant, for a better future!