Aluminum specific cleaning steps are as follows: 1, first rinse with plenty of water surface of the plate; 2, using the wipe board surface soaked by water diluted detergent with a soft cloth lightly; 3, and then a lot of water rinse board the dirt away; 4, check the board Shandong molds for aluminum dealers, for there is no place to wash with detergent to clean the focus; 5, rinse the board Jinan molds for aluminum manufacturers, until all the detergent obliterated. Note: Do not wash the hot plate surface (when the temperature exceeds 40 ° C) because of excessive evaporation of water on the plate surface paint harmful! Note that an aluminum alloy cutting, cutting bevel within 1 ° molds for aluminum tolerance of less than 1m length less than 0.5mm aluminum molds for dealers Jinan Which is good, 1m less than 1mm, the short ends of the packaging material wrapped around the film, a long tube iron frame fitted with a note pad between (three o'clock) or three-point package. 2, when the cutting surface scratches bumps and other problems need to repair three pick, cutting deformation, deformation after straightening twisted and need to pick scrapped 4. If customers have special packaging requirements for length and 5 basis having to customer requirements, packaging must be cut to facilitate customer handling guidelines for aluminum mold manufacturer, rolls aluminum molds for aluminum is provided by Jinan Heshun Aluminum Co., Ltd. . Jinan Heshun Aluminum Co. (www.jnhsly.com) Shandong Jinan, aluminum products leader, over the years, the company is implementing scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Aluminum leadership in cis with the staff warmly welcome all inquiries negotiations to create a better future for aluminum rolls.